|
.jpg) |
Organized TMARK HTX-2
Flattened heatshrink in sizes Ø2.4–50.8 mm. Lengths from 12.5–50 mm. Mainly available in yellow and white. Shrink ratio 2:1. The flattened heatshrink forms a printable label, with a surface and profile suitable for thermal transfer printing. The markers are applied to a carrier liner that has registration notches, made of thermal-sensitive 109 mm–wide paper in a “ladder” design format, so that the markers are stored organized, ready for use and easy to apply.
|
| Product sheet (PDF) - CLICK HERE |
 |
Organized TMARK HTX-3
Flattened, halogenated, UL224 recognised heat shrink in sizes Ø3.0 – 39.0 mm. Lengths from 12.5–50 mm. Mainly available in yellow and white. Shrink ratio 3:1. The flattened heat shrink forms a printable label, with a surface and profile suitable for thermal transfer printing. The markers are applied to a carrier liner that has registration notches, made of thermal-sensitive 109 mm–wide paper in a “ladder” design format, so that the markers are stored organized, ready for use and easy to apply.
|
| Product sheet (PDF) - CLICK HERE |
 |
Organized TMARK-LFH
Flattened, halogen free and low fire hazard heat shrink in sizes Ø2.4–50.8 mm. Lengths from 12.5–50 mm. Mainly available in yellow and white. Shrink ratio 2:1. The flattened heat shrink forms a printable label, with a surface and profile suitable for thermal transfer printing. The markers are applied to a carrier liner that has registration notches, made of thermal-sensitive 109 mm–wide paper in a “ladder” design format, so that the markers are stored organized, ready for use and easy to apply.
|
| Product sheet (PDF) - CLICK HERE |
 |
Continuous sleeving
bulk rolls - TMARK-CON
Flattened 2:1 shrink ratio heatshrink in sizes Ø2.4–50.8 mm. Mainly available in yellow and white. Available in continuous strips either on bulk cardboard reels, positioned behind the printer, or on smaller reels for direct fitting to printers, depending upon requirements and consumption.
|
| Product sheet (PDF) - CLICK HERE |
 |
Continuous sleeving
mini rolls - TMARK-CON
Flattened 2:1 shrink ratio heatshrink in sizes Ø2.4–50.8 mm. Mainly available in yellow and white. Available in continuous strips either on bulk cardboard reels, positioned behind the printer, or on smaller reels for direct fitting to printers, depending upon requirements and consumption.
|
| Product sheet (PDF) - CLICK HERE |
|
|
